IPE Beam

Home / Product Range / IPE Beam
Download Data Sheet in pdf format

Physical Properties

Serial Size Mass Per Meter Mass Per Meter Variance Depth Of The Section Depth Of Section Variance Width Of The Section Width Of The Section Variance Web Thickness Web Thickness Variance Flange Thickness Flange Thickness Variance Root Radius
D D± B B± t t± T T± r
Kgs/Mtr Kgs/Mtr mm mm mm mm mm mm mm mm mm
100 x 55 8.1 ± 2.5% 100 ± 2.0 55 ± 2.0 4.1 ± 0.50 5.7 ± 1.0 7
100 x 55 AA 6.72 ± 2.5% 97.6 ± 2.0 55 ± 2.0 3.6 ± 0.40 4.5 ± 0.80 7
120 x 64 10.37 ± 2.5% 120 ± 2.0 64 ± 2.0 4.4 ± 0.50 6.3 ± 1.0 7
120 x 64 AA 8.35 ± 2.5% 117 ± 2.0 64 ± 2.0 3.8 ± 0.40 4.8 ± 0.80 7
140 x 73 12.894 ± 2.5% 140 – 2 + 3 73 – 2 + 3 4.7 ± 0.75 6.9 ± 1.5 7
140 x 73 AA 10.054 ± 2.5% 136.6 – 2 + 3 73 – 2 + 3 3.8 ± 0.60 5.2 ± 1.2 7

Mechanical Properties

Particulars CQ(Typical Values) S355 JR
Yield Stress (MPA) MINIMUM 355 355
Ultimate Tensile Strength (MPA) Not Specified 490-630
Elongation % 22 22

Chemical Properties

Chemical Element CQ(Typical Values) S355 JR
Carbon (C) % < 0.300 < 0.270
Silicon (Si) % < 0.600 < 0.600
Manganese (Mn) % < 1.70 < 1.70
Phosphorus (P)% < 0.045 < 0.045
Sulpher (S) % < 0.045 < 0.045
Chrome (Cr) % < 0.350
Nickel (Ni) % < 0.014 < 0.040
Copper (Cu) % < 0.600
CEV < 0.51 < 0.45

*CE %(m/m) = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15
* * The Commercial Quality material has only been subjected to the chemical and mechanical properties and as such no assurance is given to any other testing procedures and

Grades:

  • All the IPE’s are produced in S355Jr Grades
  • The grade needs to be specified at the time of ordering the material. Acceptance of any orders for grades other than as specified above is at the discretion of Force Steel.

Length:

-Standard lengths:

  • IPE’s are produced is standard Lengths of 6mts, 9mts and 13 Mtrs.

-Non Standard Lengths:

  • Lengths other than Standard Lengths can be produced on request in increments of 1M (Minimum 5.8 Mtrs).
  • Minimum order qty for non-standard lenghts is 15 tons.
  • There is length tolerance of -0 and +50mm.
  • Supllied order qty for non standard lenghts can be +-20%.

Tolerance: The tolerances are as mentioned under EN 10056-2 standard.

Minimum Order: A minimum order quantity of 1 Bundle ( link to bundle size data sheet ) per item is applicable.